Full-swimming layer fishing method
Full-swimming layer fishing method, after learning it, you can really catch the world with one skill
Fishing is a systematic project, which involves the behavior of different fish species, climate and weather, geographical topography, hydrology and water conditions, food sources, etc., and so on. The index of any one of these factors does not match the fishing method, which will affect the fishing effect. As a result, many fishing methods have been derived.
In different situations, different methods are used; different methods are used, and different assemblies are required. Not to mention these novice fishing, but also for many veterans feel very laborious. The use of different equipment requires a large amount of expense, which is a great burden for many people.
As a result, many anglers have a dream: if there is a fishing method that "will not change in response to changes", how good it would be.
Selection and matching of fishing gear
1 fishing rod
The length of the hand pole is about 9~13 meters. For fishing in winter, fish are generally hidden in deep waters far away from the shore, so long rods are suitable; for fish in late spring and early autumn, if they move aside for food, shorter rods can be used.
In addition, when choosing a fishing rod, try to choose a long fishing rod with a larger first diameter value, because the larger the first diameter value, the more obvious the rod will shake after a little bit of the fish, and the easier it is to identify the middle fish signal. The general standard can be to use a 13-meter fishing rod with a diameter of 14 mm. The higher the diameter of the same length, the higher the price, and the fishermen can choose according to their economic strength.
2 Fishing line
The full-swimming layer fishing method is to sink to the bottom, so there is no sensitivity requirement for the line set. If there is a big carp in the fishing waters, you can choose a strand no less than 1.0, and the length is 20-25 cm. Choose No. 1.5~2.0 for the main line. The selection standard for the length of the main line is 40 cm of wind line plus the depth of the fishing point.
3 Lead sinker
Choose 2~3 grams of lead sinker, which requires the sinker to be able to reach the end; it is convenient to add lead when walking in the water.
Hold a pole
There are 3 ways to hold the pole: standing, sitting, and gantry (easy to operate, most labor-saving).
The operation method of the hook is the technical core of this fishing method. The main points are as follows.
It must be clearly recognized that fish will change the swimming layer at any time, and the biological characteristics of foraging at all levels of the water body. Get rid of the notion that the fish will be helpless as soon as they leave the bottom, and establish the notion of fishing for the entire swimming layer.
Handle hook technique. The lifting action should be slow, gentle, and uniform; when descending, let the plumb drop fall freely without being restricted by the fishing rod.
The frequency of the full swimming layer search. If the water depth is 2 meters, a rough estimate is that in the first step, it takes about 3 seconds to lift the bait hook to a height of 1.5 meters from the bottom; in the second step, it takes less than 2 seconds for the lead to fall freely to the bottom; the third step, the bait hook The hem takes about 1 second; in the fourth link, the bait hook stays on the bottom for 2 seconds. In theory, one operating cycle of the bait hook takes about 8 seconds, and the full swimming layer search can be completed about 8 times per minute. The first and fourth links are controlled by the angler, and the second and third links are formed by themselves. Anglers can refer to this frequency to flexibly control and reciprocate fishing.